HOME
Feature
-
Silicone based GEL material with low durometer and high physical performance
- Excellent in waterproof, dustproof and shock absorption
-
Insert molding is available with commodity type resins, metals and films
-
Excellent in bonding strength with resin and metal at material failure level (JIS K 6854-2)
- Help in your assembly process as it is over-molded parts
- Low compression force and absorb tolerance
- Low temperature dependence between -20 degree to 120 degree
Use Example
| FFG-40100 | FFG-40080 | FFG-40060 | ||
| Hardness | Penetration | 100 | 80 | 60 |
| Splitting Tensile | (MPa) | 0.07 | 0.10 | 0.14 |
| Elongation | ％ | 225 | 230 | 310 |
| Tensile Stress (100%) | (MPa) | 0.01 | 0.06 | 0.09 |
| Tearing strength | （N/mm） | 0.3 | 0.5 | 0.6 |
| Coefficient of loss ｔａｎδ |
(25℃/30Hz) | 0.6 | 0.3 | 0.3 |
| Compression Set | 70℃×22h×25% | 1 | 1 | 1 |
| 70% | 3 | 2 | 4 | |
| 80% | 4 | 2 | 4 | |
| Thermal Conductivity | W/m・K | 0.36 | 0.44 | 0.51 |
